The JC24N series of 100 mA current sensor provides a 100mA output for situations that require it. The JC24N series connects directly to compatible meters. This allows for easier setup and streamlined, accurate performance. These options allow one meter to monitor several different sources with various current loads and reduces overall cost. Safety circuits come standard to prevent Voltage over-output.
Summary:
• Input: 125-200Aac
• Output: 100mAac
• Sizes: 24mm
• Connection: Screw terminals (optional add-on leads)
• Form Factor: Split-Core
Applications
• Energy sub – meter
• Power meters
• Power quality monitoring
• HVAC & pumps, etc
• Distributed measurement systems
Features
• Nylon-spring, output-terminal, secure locking hinge, installation is made easier and one-touch structure make for easy installation in equipment such as a power distribution boards
• Isolated plastic case recognized according to UL94-V0
• UL / EN 61010 – 1 certified
Benefits
• Small-size, light-weight
• Simple installation
• Over-Voltage protection circuit is installed for safety
Notice
• Core contact surface is waterproofed, however if it gets rusty, you could reuse after removing rusts with spraying WD-40 or CRC5-56 on the rusted side
• Do not use any other chemicals except WD-40 or CRC5-56 on housing or any parts
• Please use only the original output screws. Not recommended to replace it with anything else
JC24N-100mA series – 100 mA Current Sensor Spec Sheet
