The JC16F-333mV split core current sensor provides a 333mV output signal based on the current sensed from the source. The JC16F-333mV can be connected directly to a meter for high accuracy energy metering. The JC16F-333mV enables one meter to monitor a range of current ratings by simply changing the main CT. These features help keep meter designs small and efficient while tracking power usage with high accuracy. Also, voltage over-output is limited for safety.
Summary
- Input: 70-100Aac
- Output: 0-600mAac
- Size: 16mm (click to see our 10mm, 24mm & 36mm sizes of the same series)
- Connection: Screw terminals
- Form factor: Split-core
Applications
- Energy sub-metering
- Power metering
- Power quality monitoring
- Equipment monitoring (HVAC & pumps, etc.)
- Distributed measurement system
Benefits
- Compact, light-weight
- Simple installation
- Over-voltage protection circuit is installed
Features
- Accurate within 1% for currents of 10% to 120% of current rating
- Nylon-spring, output-terminal, secure locking hinge, one-touch structure makes installation inside existing an breaker-boxes easy
- Isolated plastic case that conforms to UL94-V0
- UL/EN 61010-1 listed
Notice
- If the core contact surface is hit the internal core material can be damaged and effect accuracy.(Ø10, Ø16, Ø24 type)
- Please use only the original output screws, it is not recommended to replace them
- Use twisted pair wiring for the leads
JC16F-333mV Series Split-Core Current Sensor Spec Sheet
